USES_CONVERSION을 사용하장..

출처 : http://www.devpia.com/MAEUL/Contents/Detail.aspx?BoardID=51&MAEULNo=20&no=3638 조경민 USES_COMVERSION (bro@shinbiro.com) ==================================================== BSTR test( BSTR bstrVal ) {   USES_CONVERSION;   char* pszVal;   W2A(bstrVal,pszVal);   하면 pszVal 안에 BSTR문자열값이 들어간다.   BSTR bstrCopy;   A2W(pszVal,bstrCopy);   하면 pszVal값이 bstrCopy에 들어간다. SysAlloc된 상태      사용후   SysFreeString(bstrCopy);해야 함   BSTR bstrRet;   A2W(pszVal,bstrRet);   return bstrRet;    // ATL컴포넌트 메소드가 BSTR리턴시 }                    // SysAlloc후 리턴한다.                      // VC Client에서 SysFreeString해야함                      // VB Client에서는 알아서 프리시킴 BSTR<->char* 컨버팅이 간편한 USES_CONVERSION을 쓰려면... 1. ATL Project  -> 그냥 쓸수 있다. 2. MFC Project  -> #include <comdef.h>     #include <afxpriv.h> 3. Win32 Dll Project #include <comdef.h> #include <CRTDBG.H> #include <atlconv.h> 를 하면 된다. ( 하나씩 찾아봤음 -_-;) COM에서 WideChar와 AnsiChar 바꾸는 매크로 VARIANT에 문자열 넣기 // com support class #include <comdef.h> #include <AFXPRIV.H>    // USES_CONVERSION 이 정의된 곳 USES_CONVERSION;     VARIANT var; VariantInit(&var); var.vt = VT_BSTR; var.bstrVal = SysAllocString(A2W("하하하하하")); *웹페이지에서는 문자열은 VARIANT를 써야 한다. 다음은 ASP서포트 상태에서 BSTR과 char*사이의 변환이다.     if( m_piServer )     {         USES_CONVERSION;         BSTR bstrLogicPath, bstrPhysicPath;         bstrLogicPath = SysAllocString(A2W("/NstChart"));                 m_piServer->MapPath( bstrLogicPath, &bstrPhysicPath)         SysFreeString( bstrLogicPath );                 char* pszPhysicPath = W2A(bstrPhysicPath);                         m_plgManager->fnSetPlugPath( pszPhysicPath );     } ------------------------------------------------------------------ 참고 테크니컬 노트 TN059: Using MFC MBCS/Unicode Conversion Macros This note describes how to use the macros for MBCS/Unicode conversion which are defined in AFXPRIV.H. These macros are most useful if your application deals directly with the OLE API or for some reason, often needs to convert between Unicode and MBCS. Overview In MFC 3.x, a special DLL was used (MFCANS32.DLL) to automatically convert between Unicode and MBCS when OLE interfaces were called. This DLL was an almost transparent layer that allowed OLE applications to be written as if the OLE APIs and interfaces were MBCS, even though they are always Unicode (except on the Macintosh). While this layer was convenient and allowed applications to be quickly ported from Win16 to Win32 (MFC, Microsoft Word, Microsoft Excel, and VBA, are just some of the Microsoft applications that used this technology), it also had a sometimes significant performance hit. For this reason, MFC 4.x does not use this DLL and instead talks directly to the Unicode OLE interfaces. To do this, MFC needs to convert to Unicode to MBCS when making a call to an OLE interface, and often needs to convert to MBCS from Unicode when implementing an OLE interface. In order to handle this efficiently and easily, a number of macros were created to make this conversion easier. One of the biggest hurdles of creating such a set of macros is memory allocation. Because the strings cannot be converted in place, new memory to hold the converted results must be allocated. This could have been done with code similar to the following: // we want to convert an MBCS string in lpszA int nLen = MultiByteToWideChar(CP_ACP, 0,lpszA, -1, NULL, NULL); LPWSTR lpszW = new WCHAR[nLen]; MultiByteToWideChar(CP_ACP, 0, lpszA, -1, lpszW, nLen); // use it to call OLE here pI->SomeFunctionThatNeedsUnicode(lpszW); // free the string delete[] lpszW; This approach as a number of problems. The main problem is that it is a lot of code to write, test, and debug. Something that was a simple function call, is now much more complex. In addition, there is a significant runtime overhead in doing so. Memory has to be allocated on the heap and freed each time a conversion is done. Finally, the code above would need to have appropriate #ifdefs added for Unicode and Macintosh builds (which don’t require this conversion to take place). The solution we came up with is to create some macros which 1) mask the difference between the various platforms, and 2) use an efficient memory allocation scheme, and 3) are easy to insert into the existing source code. Here is an example of one of the definitions: #define A2W(lpa) (    ((LPCSTR)lpa == NULL) ? NULL : (           _convert = (strlen(lpa)+1),        AfxA2WHelper((LPWSTR) alloca(_convert*2), lpa, _convert)    )) Using this macro instead of the code above and things are much simpler: // use it to call OLE here USES_CONVERSION; pI->SomeFunctionThatNeedsUnicode(T2OLE(lpszA)); There are extra calls where conversion is necessary, but using the macros is simple and effective. The implementation of each macro uses the _alloca() function to allocate memory from the stack instead of the heap. Allocating memory from the stack is much faster than allocating memory on the heap, and the memory is automatically freed when the function is exited. In addition, the macros avoid calling MultiByteToWideChar (or WideCharToMultiByte) more than one time. This is done by allocating a little bit more memory than is necessary. We know that an MBC will convert into at most one WCHAR and that for each WCHAR we will have a maximum of two MBC bytes. By allocating a  little more than necessary, but always enough to handle the conversion the second call second call to the conversion function is avoided. The call to the helper function AfxA2Whelper reduces the number of argument pushes that must be done in order to perform the conversion (this results in smaller code, than if it called MultiByteToWideChar directly). In order to for the macros to have space to store the a temporary length, it is necessary to declare a local variable called _convert that does this in each function that uses the conversion macros. This is done by invoking the USES_CONVERSION macro as seen above in the example. There are both generic conversion macros and OLE specific macros. These two different macro sets are discussed below. All of the macros reside in AFXPRIV.H. Generic Conversion Macros The generic conversion macros form the underlying mechanism. The macro example and implementation shown in the previous section, A2W, is one such “generic” macro. It has no relation to OLE specifically. The set of generic macros is listed below: A2CW        (LPCSTR) -> (LPCWSTR) A2W        (LPCSTR) -> (LPWSTR) W2CA        (LPCWSTR) -> (LPCSTR) W2A        (LPCWSTR) -> (LPSTR) Besides doing text conversions, there are also macros and helper functions for converting TEXTMETRIC, DEVMODE, BSTR, and OLE allocated strings. These macros are beyond the scope of this discussion ? refer to AFXPRIV.H for more information on those macros. OLE Conversion Macros The OLE conversion macros are designed specifically for handling functions which expect OLESTR characters. If you examine the OLE headers you will see many references to LPCOLESTR and OLECHAR. These types are used to refer to the type of characters used in OLE interfaces in a way that is not specific to the platform. OLECHAR maps to char in Win16 and Macintosh platforms and WCHAR in Win32. In order to keep the number of #ifdef directives in the MFC code to a minimum we have a similar macro for each conversion that where OLE strings are involved. The following macros are the most commonly used: T2COLE    (LPCTSTR) -> (LPCOLESTR) T2OLE    (LPCTSTR) -> (LPOLESTR) OLE2CT    (LPCOLESTR) -> (LPCTSTR) OLE2T    (LPCOLESTR) -> (LPCSTR) Again there are similar macros for doing TEXTMETRIC, DEVMODE, BSTR, and OLE allocated strings. Refer to AFXPRIV.H for more information. Other Considerations Don’t use the macros in a tight loop. For example, you do NOT want to write the following kind of code: void BadIterateCode(LPCTSTR lpsz) { USES_CONVERSION; for (int ii = 0; ii < 10000; ii++) pI->SomeMethod(ii, T2COLE(lpsz)); } The code above could result in allocating megabytes of memory on the stack depending on what the contents of the string lpsz is!  It also takes time to convert the string for each iteration of the loop. Instead move such constant conversions out of the loop: void MuchBetterIterateCode(LPCTSTR lpsz) { USES_CONVERSION; LPCOLESTR lpszT = T2COLE(lpsz); for (int ii = 0; ii < 10000; ii++) pI->SomeMethod(ii, lpszT); } If the string is not constant, then encapsulate the method call into a function. This will allow the conversion buffer to be freed each time. For example: void CallSomeMethod(int ii, LPCTSTR lpsz) { USES_CONVERSION; pI->SomeMethod(ii, T2COLE(lpsz)); } void MuchBetterIterateCode2(LPCTSTR* lpszArray) { for (int ii = 0; ii < 10000; ii++) CallSomeMethod(ii, lpszArray[ii]); } Never return the result of one of the macros, unless the return value implies making a copy of the data before the return. For example, this code is bad: LPTSTR BadConvert(ISomeInterface* pI) { USES_CONVERSION; LPOLESTR lpsz = NULL; pI->GetFileName(&lpsz); LPTSTR lpszT = OLE2T(lpsz); CoMemFree(lpsz); return lpszT; // bad! returning alloca memory } The code above could be fixed by changing the return value to something which copies the value: CString BetterConvert(ISomeInterface* pI) { USES_CONVERSION; LPOLESTR lpsz = NULL; pI->GetFileName(&lpsz); LPTSTR lpszT = OLE2T(lpsz); CoMemFree(lpsz); return lpszT; // CString makes copy } The macros are easy to use and easy to insert into your code, but as you can tell from the caveats above, you need to be careful when using them.